BestTrack Champ Timer Instruções de Operação descarregar pdf (Página 21)

3.2.9 ow<cr>:Set./Read photo finish trigger length

This command sets the duration of the photo finish signal. Some frame

capture devices will take more than one picture if their triggering signal is too long.

The number in this command is the number of milliseconds the trigger signal will

last.

ComputerFinish Line

Sends

ow<cr> Read current value of trigger (in milliseconds)

Description

ow20<cr> Set photo finish trigger length;

allowable range is 1 to 255 milliseconds.

Finish Line  Computer

Returns

020<cr><lf> Value set for photo finish trigger length is returned.

Description

<cr><lf> Carriage return sent when setting a new value.

?<cr><lf> Invalid command.

3.2.10 ox<cr>:Set the Champ Timer Finish Line to DTX000 mode

This command sets the Champ Timer Finish Line into DTX000 mode. The

Champ Timer will use the DTX000 format to reset when a <SPACE> character is

received and to send the response string when the last car finishes. The response

string will be in the following format:

1 1.1234 2 2.2345 3 3.3456 and so on.

The placement is determined by the order in which they are returned. For example,

2 0.8984 1 1.2326 4 1.3283 3 1.5339

ComputerFinish Line

Sends

ox1<cr> Go into DTX000 format mode.

Description

ox0<cr> Return to Champ Timer lower and upper case

mode.

Finish Line  Computer

Returns

No response is sent. Timer is reset to new mode.

Description

?<cr><lf> Invalid command.

1 2 ... 16 17 18 19 20 21 22 23 24 25

Sem comentários

BestTrack Champ Timer Instruções de Operação Página 21